 CE Marking approved Features <Non-mis-step>  CBS50-110 detects the sign of mis-step and uneven rotation in driver,
then outputs alarm signal when overloading caused by mis-step.<Non-encoder> CBS50-110 realizes Non-encoder because CBS50-110 gets rotation information
in driver not from feedback control like servo motor.<Ultra high resolution rotation> Because of NanoDrive control, 16 various resolutions are selectable from
500(0.72°) to 200,000(0.0018°)
divisions per one rotation by host controller. There is no torque reduction when operating high resolution such as micro
step.(About 30% torque reduction reduce when microstep
operation)
NanoDrive control excels in equality of angle accuracy and inching feed(one
pulse feed) is available at ultra high resolution operation.<Ultra low vibration operation> CBS-50-110 realizes to depress uneven rotation and ultra lower vibration
operation than AC servo motor. <Backlash compensation function> CBS50-110 makes it possible backlash compensation generated by mechanism
such as ball gear, timing belt or reducer and realizes accurate positioning
with low cost mechanism.The detail description of Neo Servo System is here. |
| Model number | CBS50-010 | CBS50-110 |
| Power source | AC 100-120V±10% 50/60Hz | |
| Driving type | NanoDrive constant current type | |
| Driving current | 0.75A/phase Max. | 1.0A/phase Max. |
| Consumption wattage | 100VA | 200VA |
| Basic step angle | 0.72° | |
| Resolution | Base step angle(0.72°) is divided into 16 stages. Resolution : 1，2，2.5，4，5，8，10，16，20，25，40，50，80，100，200，400 |
|
| Function | Drive monitor output(mis-step sign output) Resolution change Backlash compensation Backlash value automatic acquisition Auto-current down Output current-off input Excitation timing output Overheat output
|
|
| Input signal | Photo coupler input Input resistor 390Ω Input signal
voltage L：0−0.5V H：4−5V 1 pulse input （PULSE、CW/CCW）,2 pulse input（CW,CCW）,CO,BL,PLS_END,SEL-B
|
|
| Output signal | Photo coupler Open collector output Control capacity less than
25V 10mA MONI,HEAT,D-MONI,BL_END |
|
| Dielectric Strength | No abnormality detected after the application of 2.0kV(60Hz) between Power input: Motor leads - PE terminal , Power input: Motor leads - Signal I/O terminal for one second in normal temperature and humidity. | |
| Insulation Resistance | 100MΩ or more with applied DC500V megger in normal temperature and humidity between Power input : Motor leads collection terminal - chassis and Power input : Motor leads collection terminal - Signal I/O terminal | |
| Operating environment temperature and humidity | 0 to +40℃, Less than 80% No freezing | |
| Storing environment temperature and humidity | -10 to +60℃, Less than 80% No freezing | |
| Dimension | W48 * H135 * D124mm | |
| Weight | 1010g | |
|
Set model
|
Motor model
|
Driver model
|
Phase current
|
Power source
|
| CBS50-010-4520 | NSM50-4520 | CBS50-010 | 0.75A/Phase | AC100 - 120V |
| CBS50-010-4580 | NSM50-4580 | |||
| CBS50-110-6571 | NSM50-6571 | CBS50-110 | 1.0A/Phase | |
| CBS50-110-6641 | NSM50-6641 | |||
| CBS50-110-6701 | NSM50-6701 | |||
| CBS50-110-6931 | NSM50-6931 |
| Type | NSM50-4520 | NSM50-4580 | NSM50-6571 |
| Max. Holding Torque | 2.08kgf･cm 0.204N･m |
2.77kgf･cm 0.272N･m |
5.90kgf･cm 0.579N･m |
| Rotor Inertia | 331.094gcm2 | 334.094gcm2 | 591.116gcm2 |
| Step Angle | 0.72° | ||
| Phase Current | 0.75A/phase | 1.0A/相 | |
| Dielectric Strength | No abnormality detected after the application of 0.5kV(60Hz) | ||
| Insulation Class | Class B | ||
| Insulation Resistance | >100M @ 500V and normal ambient temp and humidity | ||
| Operating temperature | 0°C to +50°C | ||
| Weight | 0.43kg | 0.49kg | 0.75kg |
| Type | NSM50-6641 | NSM50-6701 | NSM50-6931 |
| Max. Holding Torque | 8.02kgf･cm 0.787N･m |
9.60kgf･cm 0.940N･m |
16.30kgf･cm 1.590N･m |
| Rotor Inertia | 656.116gcm2 | 691.116gcm2 | 915.873gcm2 |
| Step Angle | 0.72° | ||
| Phase Current | 1.0A/phase | ||
| Dielectric Strength | No abnormality detected after the application of 0.5kV(60Hz) | ||
| Insulation Class | Class B | ||
| Insulation Resistance | >100M @ 500V and normal ambient temp and humidity | ||
| Operating temperature | 0°C to +50°C | ||
| Weight | 0.85kg | 0.95kg | 1.35kg |
|
Model number
|
Model
|
Motor |
|
Communication cable(1.5m)
|
OSC-PCS28P15 | - |
| Motor cable (1.5m) | OMC-PHR6P15 | NSM50‐4520,NSM50-4580 |
| OMC-XHP6P15 | NSM50-6571,NSM50-6641,NSM50-6701,NSM50-6931 | |
| Power supply cable(2.0m) | OPC-X3P20 | - |
| Connector set | OCN-CBS50-4 | NSM50‐4520,NSM50-4580 |
| OCN-CBS50-6 | NSM50-6571,NSM50-6641,NSM50-6701,NSM50-6931 |
| Please understand that we may make modifications to our products without notification in order to improve the capabilities. |