 ϊ{κΕy[WΝ±Ώη@Japanese here Features  Nano step high resolution positioningMaximum 500,000 division/ revolution Minimum 1 pulse moving distance : 0.00072(when basic step angle is divided by 1000) Selectable resolution from 16 types High accuracy and high resolution are available with equiangular division. Even if NanoDrive movement, same torque and speed with full step movement
are realized. Positioning with ultra low vibration is available. Low power consumptionMaximum 50% depressed (comparison with ours) There are two types of with-cover or without-cover. CE marking approved(EN60950) |
| Model | INS501-240 | ||||
| Input Voltage | DC48V}10% | ||||
| Driver Type | Star Bi-Polar type | ||||
| Outpur current | 2.8A/Phase | ||||
| Outpur current | 2 pulses input type | ||||
| Resolution | 1, 2, 2.5, 5, 8, 10, 20, 25, 40, 50, 100, 125, 200, 250, 500 or
1000 resolution Basic step angle depends on motor.(Two types of 0.72 or
0.36)
|
||||
| Funciton |
Auto-current down. Auto-Current off.
Output current off, Excitation timing signal output. Driver overheat warning
signal output. Resolution select input.
|
||||
| Signal input | Input type |
Photo coupler input, Input resistance
390Ά Input signal voltage LF0 to 0.5V@HF4 to
5V
|
|||
| ECW@(PULSE) |
CW direction movement pulse command input
(Movement command pulse in case of 1 pulse input type)
|
||||
| ECCW(CW/CCW) |
CCW direction movement pulse command input
(Rotation direction command pulse in case of 1 pulse input type)
|
||||
| ECO input |
Motor excitation and motor free are controllable.
@H level : Excitation OFF @L level : Excitation ON |
||||
| ESEL input |
This selects which resolution setting switch(SEL1 or SEL2) is
active.
@H level : Resolution selected by SEL2 is active.@L level : Resolution selected by SEL1 is active.
|
||||
| Signal output | Output type | Photo coupler open collector output,@Limited capacity is 25V 10mA or less | |||
| EMONI |
This outputs signal when output excitation pattern is
excitation zero.
|
||||
| EHEAT |
This outputs signal when heat sink
temperature in driver exceeds 70.
|
||||
| Insulation Resistance |
100MΆ or higher with DC500V applied in
normal temperature and humidity between power input / a lump of motor leads and
case and between power input/ a lump of motor leads and signal input
terminal
|
||||
|
Operating environment temperature and humidity
|
0 to +40, Less than 80%, No freezing and No
condensation
|
||||
|
Storing environment temperature and humidity
|
-10 to +60, Less than 80%, No freezing and No
condensation
|
||||
| Dimension | 129~70~35.1mm@Dimension | ||||
| Weight | Without cover type 310giINS501- Lj@@With cover type 350giINS501- j | ||||
|
Motor series
|
Set model number | Motor model | Driver model | Phase current | Power supply | |
| PCE series | INS501-240-5692AC(BC) INS501-240-5962AC(BC) INS501-240-5992AC(BC) INS501-240-599132AC(BC) |
PCE5692-AC(BC) PCE5962-AC(BC) PCE5992-AC(BC) PCE59132-AC(BC) |
INS501-240 | 2.8A/phase | DV48V | |
PCE5 -AC is single shaft and PCE5 -BC is double shaft Besides above motors magnet brake type motor and gear type motor are also supported. *Please order by motor and driver set. Please understand that we may make modifications to our products without notification in order to improve the capabilities and external appearance of our products. |